Get ready to be surprised with the all new 5 Axis Dental Milling Machine by KELKAR INDIA at the 38th IDS
The ivory Mill 5XW 5 Axis Dental Milling Machine is manufactured by KELKAR DYNAMICS, A Dental CAD-CAM Company from INDIA. ivory Mill 5XW 5 Axis Dental Milling Machine is one of the most Silent Milling dental milling machines in the world. ivoryMill is a one stop solution for all your dental milling requirements such as crowns, bridges, copings, bars, abutments, screw retained crowns, inlays, on lays, veneers, etc on materials such as zirconium oxide, PMMA, wax, glass ceramics, hybrid ceramics, CoCr and titanium.

5 Axis or 4 Axis?

ivoryMill comes with a 4 or 5 axis milling option. The 5-axis simultaneous milling protocol helps to mill the most complex set of geometries. Milling undercuts is possible due to the 5-axis configuration of the machine.

Beauty and simplicity with the Power, Play, Pause

ivoryMill offers highest operational simplicity with its unique Power Play – Pause buttons. three buttons is all it takes for you to control the machine!

Power Packed Features:

Plug and Play Capability
ivoryMill can be used right out of the box. Its designed for a quick installation which helps you to start your milling in no time. Time equals Money.

Open Architecture
ivoryMill can work along with any dental CAM software available. You are not bound in any way. Your dental milling requirements are in good hands.

Milling Strategy Options
All possible milling requirements such as coping, crowns, bridges, abutments, bars, scerw retained crowns etc. can be milled on the ivoryMill. We do not keep any stone unturned.

One Stop Solution for all your CAD-CAM Requirements

KELKAR supplies all the CAD-CAM dental materials required for ivoryMill dental milling machine

WAX
Soft CoCr
Zirconium Oxide
PMMA
Peek
Crowns
Glass Ceramic
 

DETAILED TECHNICAL SPECIFICATIONS:

ivoryMill 4XD    ivoryMill 4XW    ivoryMill 5XD    ivoryMill 5XW
No. of Axis    Four    Four    Five    Five
Rotary axis travel angle    A: +/- 180
B: N/A    A: +/- 180
B: N/A    A: +/- 180
B: +/- 30    A: +/- 180
B: +/- 30
Dimensions    536*704*602mm (W*D*H)    536*704*602mm (W*D*H)    536*704*602mm (W*D*H)    536*704*602mm (W*D*H)
Spindle    1.5 KW
60000 RPM    1.5 KW
60000 RPM    1.5 KW
60000 RPM    1.5 KW
60000 RPM
Axis Motors    Servo    Servo    Servo    Servo
Tool Changer    6 tool changer    6 tool changer    6 tool changer    6 tool changer
Type of Processing    DRY    WET and DRY    DRY    WET and DRY
Accuracy    <10 micron    <10 micron    <10 micron    <10 micron
Compressed Air    6 bar    6 bar    6 bar    6 bar
Suction    Optional    Optional    Optional    Optional
Main Voltage/ Frequency    230 V (+/- 10%) / 50 Hz    230 V (+/- 10%) / 50 Hz    230 V (+/- 10%) / 50 Hz    230 V (+/- 10%) / 50 Hz
Materials    Zirconium oxide, aluminium oxide, PMMA, plastics, composites & wax, CoCR.    Zirconium oxide, aluminium oxide, PMMA, plastics, composites, wax, Glass ceramics, hybrid ceramics, CoCr and Titanium.    Zirconium oxide, aluminium oxide, PMMA, plastics, composites & wax, CoCR.    Zirconium oxide, aluminium oxide, PMMA, plastics, composites, wax, Glass ceramics, hybrid ceramics, CoCr and Titanium